Jeffrey Machine Blog RSS Feed

HISTORYIn 1977, Frank Sager opened the doors to Jeffrey Machine (named for his son and current owner Jeffrey Sager) as a small machine, tool and die shop in Birmingham, Alabama. Frank Sager, a machini..

April 6, 2020 – Birmingham, AL – Jeffrey Machine Inc.  announces the appointment of Cindy Liles as an Outside Sales Representative for the South-Central region for the company. Liles will work in all ..

Jeffrey Machine opened its doors in 1977 as a small machine shop in Birmingham, Alabama and has grown into one of the world’s leading manufacturer of augers and other drilling tools. Our customer-cent..

Presentation for the UFMA Spring meeting was a success at Joe Wheeler State Park..

The following article appeared in the August 2013 issue of The Utility Source and is used here with permission.The following article follows how a small machine shop was pulled into in the utility con..

The following article appeared in the August 2013 issue of New Construction Products and is used here with permission.Okay, so you have a job that requires boring holes for some utility poles. Tight t..

The following article first appeared in the May 2012 issue of The Utility Source and is used here with permission.The following story tracks how an idea from the field was developed into this incredib..

Jeffrey Machine announces the addition of a new tool to their lineup. The Econo Auger still has their standard fabricated drive box and pin, 1”thick flighting with lifting eye hole and Z-pattern hard ..

Jeffrey Machine is always continuing to expand. We are proud to announce our now open location in Euless, Texas in the former Voss Parts & Supply.James Bowen will be our sales representative at the Eu..

February 7, 2019 – Birmingham, AL – Jeffrey Machine Inc. announces the appointment of Jason Hopper as an Outside Sales Representative for the company. Jason will work in all aspects of sales including..

This article written by Bob Green first appeared in the Jan/Feb 2013 edition of the IMSA Journal and is used here by permission.Drilling a five foot deep hole in rock shouldn’t be a problem with a pres..

The following article first appeared in the February 2013 issue of Foundation Drilling and is used here with permission.The following comes to us from ADSC Associate Member, Jeffrey Machine, Birmingha..